35HP - Blade

East Wind YCT Compact Dozer with slasher photo
East Wind Tractors and Dozers Logo

From

$34,950

Weekly $157

Pictures shown are illustrative only & may show optional extras. All prices are AUD & inc. GST.  Weekly prices are indicative only & subject change.

Suits medium property logo

TRACTORS FOR SALE AUSTRALIA WIDE. SMALL, MEDIUM & LARGE TRACTORS & COMPACT DOZERS FROM MIDWAY SALES.           CALL 1300 426 639

The YCT 356S-S packs a lot of punch. Part of the East Wind family, they represent great value with a step up in performance and features. Designed to cut and push dirt, the YCT is your machine for cutting a driveway or track. It will make light work of levelling a pad for a shed or rainwater tanks and very handy for clearing scrub.

The 6 way blade gives you ultimate control. A simple joystick enables you to lift the blade up and down to control how much material you cut or push at a time. Angling the blade out to the left or right enables you to doze material out to either side while driving in a straight line. And being able to tilt the blade down to either the left or right enables ground to be cambered which is perfect for cutting drains or putting a slope on a driveway.

Combined with the ability to fit all kinds of PTO/3-point linkage implements, you have an incredibly versatile machine.

35HP Blade Dozer with PTO

Features

•  35HP Steel Track Dozer
•  Manual clutch
•  2.16 litre, 4 cyl diesel engine
•  6-Way Hydraulic Blade
•  2 Year Warranty*
•  ROPS/FOPS
•  Down Pressure 3PL & PTO
 
•  Rear Hydraulic Remotes
•  Side & Rear Safety Cage
•  Suspension Seat
•  Optional Rubber Pads
•  All Terrain
•  Suits 1 – 40+ acre properties
 

6-Way Blade Functions – Versatile & easy to use

Row of yellow dozer diagrams showing blade up, blade down, blade left, blade right, blade tilt left, blade tilt right
Blade Up
Blade Down
Blade Left
Blade Right
Blade Tilt Left
Blade Tilt Right

Video

Specifications

  • GENERAL SPECIFICATIONS

    Untitled Document
    Drive: Track
    Overall length with blade: 2980mm
    Overall length without blade: 2250mm
    Overall width without blade: 1430mm
    Blade width: Blade 1740mm
    Overall height to top of ROPS/FOPS: 2370mm
    Steel track width: 290mm
    Ground clearance: 240mm
    Turning circle: 1400mm
    Operating Weight: 3130kg
    Max. draw bar pull: 2400kg
    Blade/Loader capacity: 0.67m³
    Fuel Capacity: 28L
  • ENGINE SPECIFICATIONS

    Untitled Document
    Model: Laidong ASHLL2.16LD
    Type: Direct injection, vertical liquid cooled 4cyl diesel
    Engine power kW/hp: 26/35
    At rated speed: 2350 rpm
    Max. torque Nm at rpm: 120@1650
    Displacement: 2.16L
    Bore & stroke: 85X95mm
  • TRANSMISSION, BRAKES AND STEERING

    Untitled Document
    Transmission Type: Manual Shift
    High-Low: Yes
    Speeds: 8 forward / 2 reverse
    Speed range: 0.9 to 11.5 km/hr
    Clutch type: Multiple dry disc
    Steering Clutches: Disk clutches, pedal control
    Brakes: Band brakes, pedal control
  • HYDRAULICS, 3-POINT LINKAGE AND POWER TAKE OFF (PTO)

    Untitled Document
    Pump type: Gear
    Max (L/min) / pressure (kg/cm²): 28 / 160
    Remote outlets: 2
    3PL Category: 1
    3PL Lift capacity at hitch point: 750kg
    Hydraulic down pressure yes
    PTO kW/hp: 23.9kW / 32HP
    PTO Speeds: 540/1000 (2 speed)
    PTO Engages: fwd & reverse gears
  • OPTIONAL BACKHOE

    Untitled Document
    Model No. (by Hanmey Implements): BHEF-175
    Driven By: Tractor's Hydraulics
    Boom Type: Fixed
    Boom Type Option: Side-Shift Boom available BHES-175
    Bucket width (standard): 300mm
    (A) Max. Digging Depth: 1750mm
    (B) Max. Digging Radius: 2600mm
    (C) Max. Digging Height: 3120mm
    (D) Max. Unloading Height: 1800mm
    Stabilizer Width: 1700mm
    Swing Angle for Boom: 180°
    Weight with Bucket: 480kg
YCT Dozer Introduction Video

 

Download Brochure

DOWNLOAD PDF

CONNECT WITH MIDWAY SALES

Contact us NOW

Branch details & online enquiries

SUBSCRIBE FOR UPDATES

Member

Tractor & Machinery Association

of Australia

1300 426 639

Setting the Standard

Data is approximate. Specifications subject to change without notice

V